Working with materials and covers

How to assign a fill material to a part, how to assign a cover to a part, apply edge banding taking into account the banding thickness position, control grain direction, set oversize for a fill and for a cover, hot to make a mass replacement of one material by another.

HOW TO ASSIGN FILL MATERIAL TO A PART?
1. Open an assembly (or a part) that you want to assign a material to. 2. Use the Assign command from the Woodwork Design toolbar. ...
Wed, 20 Jul, 2016 at 12:52 PM
HOW TO ASSIGN A COVER TO A PART?
1. Some materials (e. g. Laminated Boards) have a pre-applied final covering layer. Meanwhile, some materials (e.g. Chipboards) need to be separatel...
Wed, 20 Jul, 2016 at 3:00 PM
HOW TO APPLY EDGE BANDING TAKING INTO ACCOUNT THE BANDING THICKNESS AND POSITION?
1. Apply edge banding in the same way. You can also set the thickness and position for the edge banding. NOTE: Tangent edges will be automatically i...
Wed, 20 Jul, 2016 at 3:02 PM
HOW TO CONTROL THE GRAIN DIRECTON OF THE COVER AND FILL?
1. You can rotate the grain direction of the fill material or of the cover material independently. 2. Use the Grain control command in the Woodwo...
Wed, 20 Jul, 2016 at 1:07 PM
HOW TO SET AN OVERSIZE FOR A FILL?
1. Oversize control is required for such operations as contour milling, veneer gluing etc. You can access it through Woodwork Design menu item Workpiece ...
Wed, 20 Jul, 2016 at 1:10 PM
HOW TO SET UP AN OVERSIZE FOR A COVER?
1. You can use oversize control to set the size of the cover material. Click on "Cover Material Oversize". Click on the cover material that you...
Wed, 20 Jul, 2016 at 1:12 PM
HOW TO MAKE A MASS REPLACEMENT OF ONE MATERIAL BY ANOTHER?
1. Make Group selection by used Material to change it for all selected parts. Open the Material Assignment window and use picker to click on the surfa...
Wed, 20 Jul, 2016 at 1:14 PM